For outdoor thermostat
The ELEKTRA ETO2 type electronic thermostat can be used for economical snow and ice removal from outdoor surfaces. The condition for ice formation is the presence of temperatures below freezing and moisture.
The ETO2 type thermostat detects both temperature and humidity using its connected sensors, so it only starts the snow and ice removal system if snow or ice can actually form. The thermostat has the option of setting post-heating so that all snow and ice can melt safely. The ETO2 type is suitable for controlling one or two defrosting circuits. (e.g. driveway and sidewalk)
Maximum load capacity 3 x 16 A (3 x 3 600w).
The ETO2 thermostat can be mounted on a DIN rail. Dimensions: 90 x 156 x 45 mm
The thermostat has 2 ETOG-56 ground sensors for temperature and humidity detection. If you want to use the controller for two defrost circuits.
Or ETOR56 channel, used for defrosting the boiler, requires ETF-744 external temperature sensor.
It can be divided into paving stones etog56 and combined with the channel ETOR56 sensor.
It is used for economical snow and ice melting of outdoor surfaces and gutters. It detects temperature and humidity via the connected sensors. The thermostat only switches on when the temperature drops below the set value and the precipitation sensor detects moisture. The device must be mounted on a DIN rail in the protective box supplied as an accessory.
